Pack content

Normalmente i tempi di evasione per questo prodotto sono 24/h lavorative dall'ordine

 

  Erogatore d'acqua soprabanco modello H2omy Top 15 IB ACWG

  Prodotto consigliato per case, uffici, negozi, scuole, banche, farmacie, palestre, etc...

  Le sue caratteristiche principali sono le dimensioni compatte, il design moderno e la facilità di utilizzo. Consente di prelevare l'acqua mediante l’utilizzo di bicchieri, tazze e caraffe di diverse forme o dimensioni.

  L'installazione è molto semplice, e può essere posizionato ovunque ci sia un attacco dell'acqua vicino.

  3 pulsanti per l'erogazione dell'acqua: 
     - naturale ambiente
     - naturale fredda
     - gassata fredda

  Involucro esterno e inserto frontale in acciaio inox anti-impronta.

  Vaschetta raccogli gocce con indicatore di "vaschetta troppo piena"

  L'assenza di rubinetti e la zona di erogazione nascosta, rendono il percorso dell'acqua protetto da fonti di contaminazione esterne.

  Per gasare l'acqua è necessario utilizzare una bombola di CO2 alimentare (E290), che può essere scelta nella versione: Usa e Getta da 600 gr o Ricaricabile da 4 kg o da 10 kg

  Per migliorare la qualità dell'acqua erogata, consigliamo di utilizzare anche un filtro a carboni attivi per rimuovere le impurità dall'acqua e migliorarne il sapore, e una lampada UV come forma di prevenzione contro la formazione di cariche batteriche.

  Il prezzo dell'erogatore d'acqua non tiene conto del costo dell'installazione e degli accessori opzionali o necessari per la messa in funzione. Per questo motivo consigliamo di consultare anche l'elenco degli accessori disponibili per questo modello.

 

Sono inclusi nel prezzo

  Cavo corrente

  Raccorderia John Guest composta da: 
     - 2 metri di tubo da 8 mm 
     - 2 metri di tubo da 6 mm 
     - 1 Terminale diritto 3/4 F - 8 mm 
     - 1 curva 8-8 mm 
     - 1 terminale diritto 3/8 M - 8 mm

 

Le prestazioni dichiarate dalla casa produttrice fanno riferimento a questi parametri: 

- Temperatura della stanza: 25 °C 
- Temperatura dell'acqua di rete: 20 °C 
- Pressione idraulica in ingresso: 3 bar

Data sheet

Refrigeration capacity15 liters / hour
Continuous delivery capacity3 liters
Leaving water temperature3 - 10 ° C
Cooling systemice bank
Ice bank capacity1 kg
Dispensing point height (cm)23
Drip traywith drain
Materialplastic + front insert in stainless steel
Drip tray capacity40 cl
Refrigerant gasR134a
CO2 tube inlet6 mm
Inlet water pipe8 mm
Safety valveprevents water leaks caused by any internal failures
Filtrationoptional
Compressor power1/12 HP
Absorption (max)260 W - 190 W compressor
Water supplymechanics
Dimensions (cm)26 (L) x 33 (W) x 40.7 (H)
Packaging dimensions (cm)34 (L) x 43 (W) x 49 (H)
Weight18 kg

Normally the processing times for this product are 24 / h working from the order.

Installation of water dispenser connected to the water mains

The service includes:

complete installation of the dispenser and all the accessories chosen.

The commissioning, start-up and periodic maintenance of the appliances will be carried out by H2O personnel.

Normalmente i tempi di evasione per questo prodotto sono 24/h lavorative dall'ordine.

Raccordo a T 3/8M - 3/8F - 3/8F con teflon

Minivalvola cromo sfera MF 3/8"

Normally the processing times for this product are 24 / h working from the order.

Hydraulic fittings - 3/8 conical nipple

MF 1/2 "x 3/8" - 20 cm stainless steel hose
Normalmente i tempi di evasione per questo prodotto sono 24/h lavorative dall'ordine.

 

  •   Riduttore di pressione in ottone con funzionamento a pistone, sede in ottone, attacchi filettati F.F. 
  •   Previene da colpi di ariete e permette una vita più lunga agli elettrodomestici a monte. 
  •   PN: 15
  •   Pressione in uscita: 1- 4 bar 
  •   Temperatura max di funzionamento: 80 °C
  •   Misure attacchi: 1/2" FF

Normally the processing times for this product are 24 / h working from the order.

  • Single jet liter counter with direct reading on 8 numbered rollers
  • Dn 20 mm
  • Suitable for cold water 0 - 30 ° C
  • Attacks: 3/4
  • Magnetic transmission
  • 360 ° adjustable dial
  • Risks of corrosion and sedimentation excluded
  • Long life and high precision guarantee
  • In the package there are gaskets and 2 1/2 extensions
  • Dimensions without extensions (cm): 8.5 (D) x 8 (W) x 7.3 (H)
  • Dimensions with extensions (cm): 8.5 (D) x 15.5 (W) x 7.3 (H)
  • Weight without fittings: 0.45 kg
  • Weight with fittings: 0.60 kg

installazione-contalitri.PNG

Normally the processing times for this product are 24 / h working from the order.

It is an anti-flooding valve with the possibility of controlling the volume of water that passes with a variable range from about 5 to 50 liters.

It is mounted between the faucet and the inlet hose of the appliance.

If more liters than set pass through the water block (without flow interruption), the appliance blocks the flow of water.

It is ideal for all appliances and household appliances that could have an accidental loss of water such as water coolers, osmosis, washing machines, dishwashers, etc.

It is also equipped with a special non-return valve (anti-pollution).

Features:

Resistant to thermal shocks, humidity and oxidation

The 10 adjustment notches are "English gallons" equal to approximately 4.5 liters each. (example: setting the limit to the 3rd notch is about 13.5 liters)

Pipe connection: the connections are 3/4 "female threaded at the filter side inlet. 3/4" male threaded at the outlet.

D.Dimensions: 90mm x 5Ø

A useful accessory to use together is the "zeroing" which allows the water block to be reset without having to disassemble it.

Data sheet

Bursting pressure: 500 N / cm2

Maximum static pressure: 100 N / cm2

Maximum controllable volume: approx. 50 l

Minimum operating flow rate: 2 l / min

Maximum operating flow rate: 30 l / min

Maximum water temperature: 70 ° C

Normally the processing times for this product are 24 / h working from the order.

It is an accessory of the Water Block (anti-flooding valve)

Without disassembling the water block, it makes it possible to reset it in a simple and safe way

Aesthetically it appears as a small extension to the anti-flooding valve (as shown in the figure)

Features:

Resistant to thermal shocks, humidity and oxidation

Normally the processing times for this product are 24 / h working from the order.

Tap Terminal (BSP) - Cone End - John Guest

Tube diameter: 8 mm

Thread: 3/4 "(F)

Quick Connect Fittings have been designed for a wide range of applications offering a fast and safe method of connecting pipes.

John Guest fittings can be divided into two types:

A) unit of measurement in millimeters, usually black (metric system).

B) unit of measurement in inches, usually gray in color (imperial Anglo-Saxon system).

The fitting consists of three elements:

The acetal copolymer plastic body, the acetal copolymer tweezers with the stainless steel teeth and the non-toxic nitric rubber oring.

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Features of John Guest fittings:

Wide range of sizes available

Quick connection and disconnection

Possibility of reusing both the fittings and the tube

The use of tools is not necessary

High mechanical resistance

Non-toxic materials approved by the FAD (Food and Drug Administration)

The product complies with EEC standards for food products

Practical advice:

For correct installation, check that the pipe is free from scratches and that it is deburred before insertion into the fitting.

The John Guest fitting should not be tightened strongly: it must be tightened by hand and if you use the key, max half a turn more than the hand lock.

Making a joint:

○ Cut the pipe perpendicularly
○ Push the tube into the fitting as far as it will go
○ Check the tightness by pulling the tube

Disconnection:
○ Before disconnecting, make sure that the system is depressurized.
○ Push the tube and the tweezers towards the fitting and remove the tube.

Data sheet

Fitting material:

Body: acetal resin

Tweezers: acetal resin with stainless steel teeth

O-ring: non-toxic nitric rubber (NBR)

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Applications:

Fridge carbonator systems

Reverse osmosis systems

Food industry

Beverage

Compressed air for hydraulic distributors

Certifications:

FDA - food and drug administration (US)

NSF - national science foundation (US)

WRC - water research center (UK)

SK approved (Germany)

CEE (law 777 of 23.08.1982)

Ministerial Decree 174 of 06.04.2004

Data sheet

John Guest CodeCM320816FE
Thread TypeCylindrical BSP
Pipes diameter8MM
Thread3/4

Normally the processing times for this product are 24 / h working from the order.

8mm tube - The price is per meter

John Guest pipe in LLDPE (Linear Low Density Polyethylene).

The hose can be used on all John Guest quick couplings.

Black colour

Data sheet

John Guest CodePE-0806-0100M
Pipes diameter8MM

Normally the processing times for this product are 24 / h working from the order.

Straight male terminal with cylindrical thread (BSP) - John Guest

Tube diameter: 8mm

Thread diameter in mm: 16 mm

Thread: 3/8 "

Quick Connect Fittings have been designed for a wide range of applications offering a fast and safe method of connecting pipes.

John Guest fittings can be divided into two types:

A) unit of measurement in millimeters, usually black (metric system).

B) unit of measurement in inches, usually gray in color (imperial Anglo-Saxon system).

The fitting consists of three elements:

The acetal copolymer plastic body, the acetal copolymer tweezers with the stainless steel teeth and the non-toxic nitric rubber oring.

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Features of John Guest fittings:

Wide range of sizes available

Quick connection and disconnection

Possibility of reusing both the fittings and the tube

The use of tools is not necessary

High mechanical resistance

Non-toxic materials approved by the FAD (Food and Drug Administration)

The product complies with EEC standards for food products

Practical advice:

For correct installation, check that the pipe is free from scratches and that it is deburred before insertion into the fitting.

The John Guest fitting should not be tightened strongly: it must be tightened by hand and if you use the key, max half a turn more than the hand lock.

Making a joint:

○ Cut the pipe perpendicularly
○ Push the tube into the fitting as far as it will go
○ Check the tightness by pulling the tube

Disconnection:
○ Before disconnecting, make sure that the system is depressurized.
○ Push the tube and the tweezers towards the fitting and remove the tube.

Data sheet

Fitting material:

Body: acetal resin

Tweezers: acetal resin with stainless steel teeth

O-ring: non-toxic nitric rubber (NBR)

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Applications:

Fridge carbonator systems

Reverse osmosis systems

Food industry

Beverage

Compressed air for hydraulic distributors

Certifications:

FDA - food and drug administration (US)

NSF - national science foundation (US)

WRC - water research center (UK)

SK approved (Germany)

CEE (law 777 of 23.08.1982)

Ministerial Decree 174 of 06.04.2004

Data sheet

John Guest CodePM010813E
Thread TypeCylindrical BSP
Pipes diameter8MM
Thread3/8

Normally the processing times for this product are 24 / h working from the order.
For orders of more units, please contact us to ensure real availability

Head for Everpure filters model QL2B

It is compatible with the whole range of Everpure filters

Guaranteed against wear and corrosion

The installation and replacement of the Everpure Cartridge is quick and easy
It is necessary to use 2 John Guest Straight male fittings (BSP) 3 / 8M - 8MM (JG) to be screwed to the filter head, to connect the JG pipes of the inlet and outlet of the treated water.

Features:

3/8 Female connections

QL2B Head Dimensions (mm): 80 (L) - 60 (H)

Normally the processing times for this product are 24 / h working from the order.
For orders of more units, please contact us to ensure real availability.

  • Oceano Sintered Carbon Block AG Small filter
  • Filtration capacity: 0.5 micron
  • Removes from water: suspended substances greater than 0.5 µm, chlorine and derivatives, organohalogen compounds, organic substances and metal compounds.
  • Waterline Bayo attack. It is compatible with the Everpure QL2B filter head

Short description
It adopts the sintered Carbon Block technology with 5 micron filtration degree. The silver molecules present in the filter structure prevent bacteria and viruses from proliferating, keeping the water bacteriologically pure.

Installation and use
Bayonet mount for Waterline Bayo, Everpure QL2B and similar heads.

Vertical or horizontal installation with the aid of cartridge support clips.

1) Before removing the filter, close the water inlet and eliminate the pressure in the circuit by opening the downstream tap.

2) Rotate the exhausted filter 90 ° clockwise, then remove the cartridge from the head.

3) Insert the new filter, after removing the protective cap, and turn it 90 ° counterclockwise.

4) Open the inlet valve and dispense water to activate the new filter for at least 3 minutes.

After short periods of inactivity, run water before taking it out for drinking.

In case of prolonged non-use, disinfect the system.

Intended use

Composite structure filter (dm 25/2012, ex dm 443/990 art.2 paragraph 8) for drinking water treatment in derogation with arsenic parameter

Do not use where the water is microbiologically hazardous or of unknown quality without adequate disinfection upstream and after the system.

Data sheet

Filter modelSintered Carbon Block 0.5 µm AG
Actionremoves suspended substances greater than 0.5 µm, chlorine and derivatives, organohalogen compounds, organic substances and metal compounds from the water.
Filter technologySintered Carbon Block. The silver molecules present in the filter structure prevent bacteria and viruses from proliferating, keeping the water bacteriologically pure.
Capacity (max)3 liters / minute
Temperature (min / max)2 - 39 ° C
Filtration capacity0.5 micron
Treatment capacity11000 liters
DM 25/2012 certificationtechnical provisions concerning equipment for the treatment of drinking water. EU Regulation 10/2011 concerning plastic materials and objects intended to come into contact with food products.
DM 174/2004 certificationregulation concerning the materials and objects that can be used in fixed installations for the collection, treatment, adduction and distribution of water intended for human consumption.
Filter body materialPP
Silver filter
Height (cm)25.5
Diameter (cm)8.8
Filter formatSmall
AttackBayo

Normally the processing times for this product are 24 / h working from the order.

Tap Terminal (BSP) - John Guest cone end

Tube diameter: 6 mm

Thread: 3/4 "(F)

Quick Connect Fittings have been designed for a wide range of applications offering a fast and safe method of connecting pipes.

John Guest fittings can be divided into two types:

A) unit of measurement in millimeters, usually black (metric system).

B) unit of measurement in inches, usually gray in color (imperial Anglo-Saxon system).

The fitting consists of three elements:

The acetal copolymer plastic body, the acetal copolymer tweezers with the stainless steel teeth and the non-toxic nitric rubber oring.

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Features of John Guest fittings:

Wide range of sizes available

Quick connection and disconnection

Possibility of reusing both the fittings and the tube

The use of tools is not necessary

High mechanical resistance

Non-toxic materials approved by the FAD (Food and Drug Administration)

The product complies with EEC standards for food products

Practical advice:

For correct installation, check that the pipe is free from scratches and that it is deburred before insertion into the fitting.

The John Guest fitting should not be tightened strongly: it must be tightened by hand and if you use the key, max half a turn more than the hand lock.

Making a joint:

○ Cut the pipe perpendicularly
○ Push the tube into the fitting as far as it will go
○ Check the tightness by pulling the tube

Disconnection:
○ Before disconnecting, make sure that the system is depressurized.
○ Push the tube and the tweezers towards the fitting and remove the tube.

Data sheet

Fitting material:

Body: acetal resin

Tweezers: acetal resin with stainless steel teeth

O-ring: non-toxic nitric rubber (NBR)

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Applications:

Fridge carbonator systems

Reverse osmosis systems

Food industry

Beverage

Compressed air for hydraulic distributors

Certifications:

FDA - food and drug administration (US)

NSF - national science foundation (US)

WRC - water research center (UK)

SK approved (Germany)

CEE (law 777 of 23.08.1982)

Ministerial Decree 174 of 06.04.2004

Data sheet

John Guest CodeCM320616E
Thread TypeCylindrical BSP
Pipes diameter6MM
Thread3/4

Normally the processing times for this product are 24 / h working from the order.

Intermediate reduction - John Guest

Tubes diameter: 8mm - 6mm

Quick Connect Fittings have been designed for a wide range of applications offering a fast and safe method of connecting pipes.

John Guest fittings can be divided into two types:

A) unit of measurement in millimeters, usually black (metric system).

B) unit of measurement in inches, usually gray in color (imperial Anglo-Saxon system).

The fitting consists of three elements:

The acetal copolymer plastic body, the acetal copolymer tweezers with the stainless steel teeth and the non-toxic nitric rubber oring.

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Features of John Guest fittings:

Wide range of sizes available

Quick connection and disconnection

Possibility of reusing both the fittings and the tube

The use of tools is not necessary

High mechanical resistance

Non-toxic materials approved by the FAD (Food and Drug Administration)

The product complies with EEC standards for food products

Practical advice:

For correct installation, check that the pipe is free from scratches and that it is deburred before insertion into the fitting.

The John Guest fitting should not be tightened strongly: it must be tightened by hand and if you use the key, max half a turn more than the hand lock.

Making a joint:

○ Cut the pipe perpendicularly
○ Push the tube into the fitting as far as it will go
○ Check the tightness by pulling the tube

Disconnection:
○ Before disconnecting, make sure that the system is depressurized.
○ Push the tube and the tweezers towards the fitting and remove the tube.

Data sheet

Fitting material:

Body: acetal resin

Tweezers: acetal resin with stainless steel teeth

O-ring: non-toxic nitric rubber (NBR)

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Applications:

Fridge carbonator systems

Reverse osmosis systems

Food industry

Beverage

Compressed air for hydraulic distributors

Certifications:

FDA - food and drug administration (US)

NSF - national science foundation (US)

WRC - water research center (UK)

SK approved (Germany)

CEE (law 777 of 23.08.1982)

Ministerial Decree 174 of 06.04.2004

Data sheet

John Guest CodePM200806E
Pipes diameter6MM
Pipes diameter8MM

Normally the processing times for this product are 24 / h working from the order.

6mm tube - The price is per meter

John Guest pipe in LLDPE (Linear Low Density Polyethylene).

The hose can be used on all John Guest quick couplings.

Black colour

Data sheet

John Guest CodePE-0604-0100M
Pipes diameter6MM

Normally the processing times for this product are 24 / h working from the order.
For orders of more units, please contact us to ensure real availability.

  • Disposable CO2 bottle of 600gr power E290 (used to carbonate water).
  • For an average carbonation, about 5 grams of CO2 are used for each liter of water.
  • It is suitable for all types of carbonating refrigerators that use disposable co2 cylinders.
  • The cylinder is supplied together with a black support base which can be removed if necessary.
  • Containing a liquid gas, for correct use, the cylinder must only be used vertically or slightly inclined (no more than 45 °).
  • Beware of tanks for aquariums that look the same but have a non-food co2 and a different connection thread.
  • The cylinder is easily replaceable with the "unscrew and screw" system.
  • The empty container (it is not refillable) must be disposed of in ferrous materials

This co2 cylinder is used by the major manufacturers of water dispensers:
Asset, Blupura, Brewservice, Celli, Cem Industries, Cosmetal, Culligan, Frigeria, Frizzy, Italbedis, NTS Water, RG Italia, Zerica, Kosmologik

Data sheet

Full cylinder weight1.70 kg
Test pressure165 bar
Tare1.10 kg
Internal pressure36 bar
Operating pressure110 bar
Manufacturing materialcarbon steel S355M
Autonomy100/120 liters of water (depending on the degree of carbonation)
Burst pressure330 bar (min)
Volume950 ml
Tank capacity600 gr
Type of gasE290
Cylinder typedisposable
Valve threadM11X1

Normally the processing times for this product are 24 / h working from the order.

Straight male terminal with cylindrical thread (BSP) - John Guest

Tube diameter: 6mm

Thread: 1/8 "

Quick Connect Fittings have been designed for a wide range of applications offering a fast and safe method of connecting pipes.

John Guest fittings can be divided into two types:

A) unit of measurement in millimeters, usually black (metric system).

B) unit of measurement in inches, usually gray in color (imperial Anglo-Saxon system).

The fitting consists of three elements:

The acetal copolymer plastic body, the acetal copolymer tweezers with the stainless steel teeth and the non-toxic nitric rubber oring.

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Features of John Guest fittings:

Wide range of sizes available

Quick connection and disconnection

Possibility of reusing both the fittings and the tube

The use of tools is not necessary

High mechanical resistance

Non-toxic materials approved by the FAD (Food and Drug Administration)

The product complies with EEC standards for food products

Practical advice:

For correct installation, check that the pipe is free from scratches and that it is deburred before insertion into the fitting.

The John Guest fitting should not be tightened strongly: it must be tightened by hand and if you use the key, max half a turn more than the hand lock.

Making a joint:

○ Cut the pipe perpendicularly
○ Push the tube into the fitting as far as it will go
○ Check the tightness by pulling the tube

Disconnection:
○ Before disconnecting, make sure that the system is depressurized.
○ Push the tube and the tweezers towards the fitting and remove the tube.

Data sheet

Fitting material:

Body: acetal resin

Tweezers: acetal resin with stainless steel teeth

O-ring: non-toxic nitric rubber (NBR)

These characteristics make them usable for food liquids, compressed air, co2 and other gas mixtures.

Applications:

Fridge carbonator systems

Reverse osmosis systems

Food industry

Beverage

Compressed air for hydraulic distributors

Certifications:

FDA - food and drug administration (US)

NSF - national science foundation (US)

WRC - water research center (UK)

SK approved (Germany)

CEE (law 777 of 23.08.1982)

Ministerial Decree 174 of 06.04.2004

Data sheet

John Guest CodePM010611E
Thread TypeCylindrical BSP
Pipes diameter6MM
Thread1/8

Normalmente i tempi di evasione per questo prodotto sono 24/h lavorative dall'ordine. 
Per ordini di più unità, contattateci per accertarvi della reale disponibilità.

 

  Materiale: Lega di Alluminio HR

  Trattamenti: Anodizzato (Antracite)

  Pressione ingresso: Da 10 a 160 bar

  Pressione uscita: 0-6 bar [regolabile]

  Manometri: DN 40 bassa pressione [0-10bar] attacco posteriore

  Sicurezze: Sovrapressione

  Attacco bombola: M 11X1 per bombole a gettare

  Uscita: 1/8 femmina

  Portata: 15 l/min

  Dimensioni:  74X∅ 38 mm

  Peso: 142 g