Digital TDS + Water Temperature Tester View larger

TDS digital tester

R000302

New

€ 31,00 tax excl.

€ 37,82 tax incl.

Normally the processing times for this product are 24 / h working from the order.
For orders of more units, please contact us to ensure real availability.

Portable digital tester, to measure TDS (Total Dissolved Solids) and water temperature.

The amount of fixed water residue is expressed in PPM (1 ppm ≅ 1 mg/L).

It allows easy checking of the health status of all reverse osmosis systems. It is often used to control the water inside aquariums.

Useful information

The TDS is the total amount of all minerals, salts, metals, anions or cations dissolved in a given volume of water, including anything present in the water, except for molecules, solids and particles that are not dissolved but remain in Suspension. It is expressed in mg / L or in parts per million “ppm”. So PPMs indicate how many milligrams of dissolved solids are contained in one liter of water.

The total concentration of dissolved solids is given by the sum of the ions present in the water of: sodium, potassium, calcium, magnesium, chlorides, sulphates, bicarbonates and others.

A TDS meter is based on the electrical conductivity of water (EC), measured in microsiemens (μS). Since there is an increase in electrical conductivity in proportion to the quantity of dissolved substances, this is a useful parameter to obtain an (approximate) measure of the content of dissolved salts in mineral water (fixed residue). Very "pure" water (distilled, deionized, etc.) has a very low electrical conductivity (about 1 microsiemens per cm - µS / cm). Conductivity also depends on the water temperature, and therefore it is necessary to bring the measured values back to the theoretical ones that would occur at a reference temperature of 25 ° C (or 18 ° C or 20 ° C). Most of the commercialized mineral waters have electrical conductivity between 100 and 700 µS / cm.

Warning: TDS and electrical conductivity are not the same.

Data sheet

Features:

Measure dissolved solids (TDS) and water temperature.

Automatic Temperature Compensation (ATC)

Digital calibration (via push button)

Factory Calibrated: Calibrated with a 342 ppm NaCi solution. The instrument can be recalibrated with digital calibration using the menu buttons.

Magnetic body and waterproof casing

Auto-off, with data taken function and low battery indicator

Technical specifications:

TDS range: 0-5000 ppm (mg / L)

Data accuracy: +/- 2%

Temperature range: 0-80 ° C

Dimensions (cm): 1.3 (L) x 2.8 (W) x 15 (H)

Weight: 42.5 g

Faqs